|
CMCP-260 NEMA 4 and 4X Junction Boxes / Enclosures |
|
NEMA 4 and 4X Enclosures are provided by CMCP for housing of any instrument. These enclosures are not limited to house our products, although CMCP should be contacted for any non standard configuration that is required for an application.
The enclosures' covers have a continuous hinge on the long side of the unit for convenience, and are secured to the enclosure with clamps. The enclosures are available in NEMA 4 or NEMA 4X to cover most applications. All enclosures are provided with an oil resistant gasket and clamps for easy screwdriver access. |
NEMA 4 Painted Steel Enclosures:
|
|
ANSI 61 powder coated on the interior and exterior surfaces. They are constructed from 14 gauge mild steel. These enclosures are designed for use in areas which may be regularly hosed down or are very wet, and they are suitable for indoor or outdoor installations. |
Ordering Information:
|
CMCP260PS |
-XX |
NEMA 4 Painted Steel Enclosures |
|
|
-01 |
6" x 6" x 4" D |
|
|
-02 |
8" x 6" x 3.5" D |
|
|
-03 |
10" x 8" x 6" D |
NEMA 4X Fiberglass Enclosures:
|
|
NEMA 4X Fiberglass Enclosures are designed for use in areas which may be regularly hosed down or are very wet, and they are suitable for indoor or outdoor installations. |
Ordering Information:
|
CMCP-260FG |
-XX |
NEMA 4X Fiberglass Enclosures |
|
|
-01 |
6" x 6" x 4" D |
|
|
-02 |
8" x 6" x 3.5" D |
|
|
-03 |
10" x 8" x 6" D |
NEMA 4X Stainless Steel Enclosures:
|
|
Constructed from 14 gauge 304 stainless steel rather than a mild steel. They are designed for the same use as the NEMA 4 enclosures with the ability to resist corrosive environments. |
Ordering Information:
|
CMCP-260SS |
-XX |
NEMA 4X Stainless Steel Enclosures |
|
|
-01 |
6" x 6" x 4" D |
|
|
-02 |
8" x 6" x 3.5" D |
|
|
-03 |
10" x 8" x 6" D |
Download Data Sheet In PDF Format
Installation Manual in PDF Format