|
CMCP-420VT Loop Powered Vibration Transmitter |
|
|
Features:
|
|
The CMCP-420VT is a solid state, loop powered vibration transmitter. It provides a 4-20 mA output that is proportional to overall vibration in terms of velocity. The CMCP-420VT continuously monitors machinery health and transmits directly into a PLC or DCS for trending, alarm and machine shutdown. In addition, the CMCP-420VT provides access to the dynamic transducer output. Portable data collector/analyzers can be utilized for detailed machine fault analysis. |
|
Simple Installation:
|
Simply mount the CMCP-420VT into a tapped hole in the bearing housing or machine case, connect two wires into a 4-20 mA loop, and you are ready to interface into a PLC or DCS. Electrical conduit may be connected directly to the top 3/4" NPT fitting. The CMCP-420VT has a tapped 1/4"-28 UNF hole and has several adaptors to fit almost any application. If the optional LED display is ordered it is shipped loose, and is a simple installation. |
Specifications:
|
Dynamic |
|
|
Output: |
4-20 mA proportional to full scale Velocity |
|
Frequency Response: |
2-2,000 Hz |
|
Buffered Output: |
Acceleration, 100 mV/g |
|
Accuracy: |
±5% |
|
Electrical |
|
|
Power (Two wire loop power): |
+ 22 to + 36 Vdc |
|
Maximum Load: |
600 Ohms resistive |
|
Grounding: |
Case Isolated |
|
Environmental |
|
|
Operating Temperature: |
-20º C to +80º C |
|
Sealed: |
Epoxy Encapsulated |
|
Enclosure: |
SS, NEMA 4, 4X, 12 |
|
Mounting: |
1/4"-28 UNF Stud Mounted |
|
Weight: |
8 oz. (without display) |
Accessories:
|
CMCP-420BNC |
CMCP-420EL |
CMCP-420LED |
CMCP-420WF |
Ordering Information:
|
CMCP-420VT |
-XX |
-XX |
-XX |
Loop Powered Solid State Vibration Transmitter |
|
|
-01 |
|
|
0-1 in/sec RMS |
|
|
-02 |
|
|
0-2 in/sec RMS |
|
|
-03 |
|
|
0-25 mm/sec RMS w/ M8 Stud |
|
|
-04 |
|
|
0-50 mm/sec RMS w/ M8 Stud |
|
|
|
-00 |
|
1/4"-28 UNF, Standard Mount |
|
|
|
-01 |
|
1/2" NPT Stud Mounting Adapter |
|
|
|
-02 |
|
3/4" NPT Stud Mounting Adapter |
|
|
|
-03 |
|
3/8" NPT Stud Mounting Adapter |
|
|
|
-04 |
|
1/4" NPT Stud Mounting Adapter |
|
|
|
|
-00 |
No LED Display |
|
|
|
|
-01 |
With LED Display (shipped loose) |
|
|
|
|
-02 |
With BNC Adaptor |
|
CMCP-420LED |
-XX |
|
|
CMCP-420VT Display Retrofit |
|
|
-01 |
|
|
0-1 in/sec |
|
|
-02 |
|
|
0-2 in/sec |
|
|
-03 |
|
|
0-25 mm/sec |
|
|
-04 |
|
|
0-50 mm/sec |
|
CMCP-420BNC |
|
|
|
BNC Adapter Retrofit |
|
CMCP-420EL |
|
|
|
3/4" NPT Elbow |
|
CMCP-420WF |
|
|
|
3/4" NPT Weatherproof Cable Fitting |
Download Data Sheet in PDF Format
Download Manual in PDF Format