CMCP - Condition Monitoring & Custom Products

CMCP-701 Piloted End Mill Spot Reamer

Features:

• Ideal for accelerometer mounting

• Provides a smooth surface perpendicular to mounting hole

• Disposable and low cost

Piloted End Mill Aircraft Spot Reamers are used to mill a 1" (2.54 cm) smooth flat area on bearing housings. The flat area will accept a stud mounted accelerometer or a glue (epoxy) mounted with an STI Accelerometer Mounting Pad. A 7/32" drill,  pilot, allen wrench and end mill are included in each kit. The 7/32" drilled hole can then be tapped with a 1/4" x 28 UNF starter and bottom tap for stud mounted accelerometers.

CMCP-701

Piloted End Mill Spot Reamer