CMCP - Condition Monitoring & Custom Products

CMCP-OS2400 Industrial Radios

Features:

The CMCP-OS2400 industrial radios combined with our Analog to Digital Converters and CMCP-500 series transmitters or CMCP-420VT vibration transmitters provide a rugged and reliable remote monitoring solution.

Designed to operate in high-interference environments, the radios combines advanced frequency hopping and digital signal processing technology with outstanding receiver sensitivity and antenna diversity resulting in exceptional noise and interference rejection. Peer-to-peer addressing and store-and-forward repeaters allow point-to-point, broadcast, and point-multipoint nodes. Store-and-forward repeater mode extends network range and conserves bandwidth over the RF channel. The RF output levels are user-configurable and 32 data channels allow multiple networks to operate in the same area.

The CMCP-OS2400 industrial radios operate in the license-free 2.4 GHz ISM band and can be used throughout the world with no site licenses or monthly leased line/wireless service fees.

Operating range with the standard antenna (shown above) is up to 1/2 mile. Several antenna options are available to increase the range up to and beyond 16 miles.

General:

Size

4.50” W x 4.12” H x 2.32” D

Weight

8 ounces

Operating Temperature

-40°C to +75°C; -40°F to +167°F

Humidity

To 90% RH, non-condensing

Antenna

Two SMA connectors, automatic antenna diversity

Range

Up to 16 miles with high-gain antennas

(can be extended with repeaters)

Software

Windows®-based user setup, diagnostic software

Data Interface: CMCP-OS2400-485

Serial Data Interface

RS-485, RS-422 and RS-232

Communication

Asynchronous half-duplex/full-duplex

I/O Data Rate

1200 bps to 115.2 Kbps full-duplex

Network Topology

Point-to-point, broadcast, point-to-multipoint, store and forward repeater, peer-to-peer

Channels

32 user-selectable

Error Detection/Correction

32 bit CRC with automatic re-send query (ARQ)

Latency

<20 ms

Encryption

128 bit proprietary encryption

Data Interface: CMCP-OS2400-ETHERNET

Ports

10/100 BaseT

Connector

RJ-45

Compliance

IEEE 802.3, 802.3u, 802.3x

Network Topology

Peer-to-peer

Channels

32 user-selectable

Error Detection/Correction

32 bit CRC with automatic re-send query (ARQ)

Encryption

128 bit proprietary encryption

Radio Characteristics:  

Frequency

2.4-2.4835 GHz for USA; varies for other countries. Frequency hopping spread spectrum (FHSS)

Output Power

1 mW-250 mW, programmable;

Max EIRP up to 64 W effective radiated power

Channel Data Rate

250 Kbps

Receiver Sensitivity

-100 dBm @ 5x10-4 BER typical

Power: 

Supply Voltage

6-24 VDC

Average Power

2.5 W master, 1.25 W remote

Regulatory Approvals: 

FCC

FCC Part 15.247

Industry Canada

RSS 210

CE/Europe

ETSI 300 328, ETSI 301 489, EN 60950

ATEX Pending

UL

UL 1604 Class 1 Division 2, Groups A,B,C,D Temp. Code: T4A

CSA/cUL

C22.2 No. 213-M1987

Mexico/Australia

Approved

CMCP-OS2400

-XXX

One Industrial Radio with Standard Antenna

-485

Supports RS-232/422/485

MODBUS RTU and ASCII

-ETHERNET

Supports Ethernet - All 802.3 Protocols